3 ways to get the most from your life-saving smoke detectors

July 27, 2015

Fire Safety 101

Most fire-associated deaths are due to suffocation rather than burns, so maintaining your detector  is essential  when it comes to protecting you and your loved ones. Your how to guide: functionality, selection, and 4 simple steps to maintain this life-saving device.

3 ways to get the most from your life-saving smoke detectors

Select one that works for you

Smoke detector work by sensing combustable particles in the air.

You have two choices: photoelectric or ionized.

1. A photoelectric detector sounds an alarm when its light beam is obscured by smoke, steam or dust.

2. An ionization detector senses ions or particles created by fire, even in the absence of smoke.

Both are excellent, although the ion detector is more selective when it comes to sounding off at the first sign of combustable material.

Ensure they are properly installed

Battery-operated smoke detectors are easy to install yourself, but AC-powered detectors are wired into your home's electrical system and should be installed by an electrician. If opting for the AC-pwered detector, be sure it hasabattery backup. Blackouts and electrical fires interfere with the power and will prevent the detector from working.

Regularly check their condition

Fire inspectors report that in a large number of residential fire deaths, a detector was in place but failed to operate because the battery was dead or the detector had been  disconnected by residents.

Most smoke detectors chirp periodically when batteries are low to remind owners that it's time to replace them.

1. Check them once a month even if you do not hear a noise. For most, you only need to press a button (use a broom handle for ceiling units). Develop a testing routine — for instance, check detectors on the first day of each month.

2. Replace batteries at least once a year and always use fresh batteries. Make it a tradition to replace your smoke detectors' batteries at the beginning of each calendar year, or at the end of Daylight Savings.

3. Use a vacuum cleaner to clear dust and cobwebs from the face and grillwork of smoke detectors once a month, when you check the condition of the batteries.

4. Finally, it is prudent to replace smoke detector units that are more than 10 years old.

The material on this website is provided for entertainment, informational and educational purposes only and should never act as a substitute to the advice of an applicable professional. Use of this website is subject to our terms of use and privacy policy.
Close menu